Mekitec · Medium packs and multipacks

Mekitec MIDMEKI

X-ray system for medium packs, multipacks and trays of smaller products. The compact MEKI design with a wider tunnel and a 200 W source.

Power: 200 W (40–80 kV)
Detection area: 390 × 200 mm
Load: up to 20 kg
IP rating: IP65

What it is for

MIDMEKI is based on the compact MEKI but has a wider conveyor and a larger detection area. It inspects packs up to 390 mm wide and 200 mm high, including whole trays of smaller products.

Moisture, salt and metal or aluminium packaging are no problem. The rejector is chosen to suit the product, the packaging and the line layout.

Typical products

bakery and confectionery, including filling inspection
meat, sausages and ready meals in trays
cheese and dairy products
multipacks and trays of smaller packs
products in aluminium foil and metallised packaging

Finds what a metal detector misses

Glass, stone, calcified bone, ceramics and dense plastics. Metal including stainless steel, even in foil or metal packaging.

Quality inspection too

With MEKI AI it checks piece count and filling, missing or extra products, seals and clips, and detects cavities and organic contaminants. We verify which functions make sense on your product.

Hygienic design

Stainless steel, IP65, conveyor belt approved for food contact (EU and FDA).

Rejector to suit the line

Air blast, pusher, flipper or drop-down reject, depending on product and space.

Technical specifications

X-ray power	40–80 kV, 0.2–5.0 mA, max. 200 W
Detection area	390 × 200 mm (width decreases with height, see drawing)
Max. product length	300 mm (MI.S1, MI.S2), 500 mm (MI.S3)
Conveyor speed	MI.S1: 0.1–1.0 m/s; MI.S2/S3: 0.16–1.0 m/s depending on gearbox
Max. conveyor load	MI.S1: 5 kg; MI.S2 and MI.S3: 20 kg
HMI	12″ colour display, Windows 11, USB, Ethernet
IP rating	IP65
Power supply	110/240 V AC, 50–60 Hz
Dimensions (W × D × H)	1,000 / 1,400 × 702 × 2,020 mm
Weight	250 kg
Detector	linear scanner, resolution 0.4 mm
X-ray leakage	less than 1 µSv/h
Operating conditions	0–35 °C, humidity 30–85 % (non-condensing)
Standards	EN 61010-2-091, FDA 21 CFR 1020.40, safety circuit CAT 3, PL d

According to manufacturer data. Maximum load, length and speed cannot always be combined; we confirm the configuration for your product.

Will your product fit?

The taller the product, the narrower it may be. For each product height, the table shows the maximum width.

Rental

MIDMEKI is also available for rent

Short term after a line failure, when you need to re-inspect a whole batch, or for an audit when you do not yet have your own system. You only pay a daily rate.

Enquire about rental